avisame.cc
STEP BY STEP

Get your Avisame ready

Download printable manual

PDF · A4 · 2 pages

Avisame USB · 5 V Wi-Fi · 2,4 GHz Your phone
01

Plug in your Avisame

Use a USB charger rated at 5 V, 1 A or more.

The blue light blinks slowly.

Is the light not blinking?

If it already has an owner, avoid repeated restarts: they could open an ownership transfer.

If it is new, check the cable and charger. If it still fails, ask for help.

Ask for help
02

Connect it to your Wi-Fi

  1. Scan the label's QR code with your camera.
  2. Join the Avisame-XXXX network.
  3. On the page that opens, choose your 2.4 GHz Wi-Fi.
  4. Enter the password and tap “Connect”.

The page confirms the connection.

Cannot scan the QR code?
  1. On your phone, open Settings → Wi-Fi.
  2. Choose the Avisame network shown on the label.
  3. Enter the password from that same label.

Open this address in your browser: http://192.168.4.1

Did the page not open?

Stay on the Avisame network, even if it says “No internet”.

Open this address in your browser: http://192.168.4.1

Will it not connect to Wi-Fi?

Check the password. Move Avisame closer to the router. Use the 2.4 GHz network.

03

Add it to your account

  1. Save the code shown on the page.
  2. Switch back to your home Wi-Fi or mobile data.
  3. Tap “Continue”. Create an account or sign in.

Your device appears in your account.

Did the page close?

Go to “Link device” and scan the QR stuck on your Avisame, or type the code. If it isn't found, unplug it, plug it back in and try again in a minute.

Link a device
04

Avisame on your home screen

Choose your phone. Use its browser.

iPhone · Safari
  1. Open avisame.cc in Safari.
  2. Tap “Share”. It may be under “More”.
  3. Choose “Add to Home Screen”.
  4. If “Open as Web App” appears, turn it on. Tap “Add”.
Android · Chrome
  1. Open avisame.cc in Chrome.
  2. Tap the three-dot menu.
  3. Choose “Add to home screen” or “Install app”.
  4. Confirm “Add” or “Install”.

Open Avisame from its icon. Sign in if asked.

Already have the app installed?

Open it from its icon and continue with alerts. You do not need another shortcut.

05

Choose and test your alerts

  1. Open your device. Give it a name.
  2. Choose the sounds you want to detect.
  3. Tap “Enable notifications”, then “Allow”.
  4. Send a test from notifications.
  5. Background noise → Calibrate background noise. Stay quiet for 10 seconds.
  6. Under “Test detection”, try a sound from your home.

The test alert arrives and the detected sound appears.

The detection test does not send alerts. Test notifications separately.

Open my devices →
Did the alert not arrive?

Check your phone's permissions and that Avisame shows “Online”. On iPhone, open it from the home screen icon.

Get help with alerts
06

Connect your lights

Open your device → Light alert → Add light.

Smart Life / Tuya
  1. Download the Smart Life app, create an account and add the bulb there.
  2. Return to Avisame and search for the light.
  3. Give Avisame the Smart Life permission when it asks.
WiZ
  1. Download the WiZ Connected app, create an account and add the bulb there.
  2. If Avisame doesn't find it: in the WiZ app, Settings → Security, check that local communication is on.
  3. Return to Avisame and search for the light.
Tapo
  1. Set up the lamp in the Tapo app.
  2. Return to Avisame and search for the light.
  3. Enter your Tapo email and password when asked.

Avisame and the lights must be on the same home network.

  1. Tap “Test” next to the light. Check that it blinks.
  2. Under “When do they blink?”, add a rule: sound → light.

The light responds to the test and has a saved rule.

Cannot find the light?

Leave it switched on. Avoid the guest network. Check that the device is online and search again.

Before finishing

Open my devices →